Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How can the Altivar 58 drive be set to freewheel stop?

    How can the Altivar 58 drive be set to freewheel stop?

    Product Line:
    Altivar 58



    With ATV58 or Econoflex drives, freewheel stop is based on the status of a logic input. In the I-O menu (menu 5) set up a logic input to be freewheel stop (NST). When the input is at 0 state (when there is no voltage on the input), the drive will freewheel stop.
    It is also possible to set the drive up to freewheel stop when the frequency goes below a preset value. In menu 3 (drc or drive menu) set Stt to NSt. Then set the FFt threshold in menu 2 (SEt or Adjust menu) to the desired frequency at which to begin freewheel stop.
    See the keypad programming guide for more details.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance