Trade | Clipsal USB charger mechanism and USB power points

Australia’s most universal USB mech

Designed in Australia for Australian conditions. Clipsal’s innovative 30 Series USB Charger Mech provides an adaptable, efficient and reliable solution.

Use to charge phones, tablets and other consumer electronic devices in a wide variety of market segments, without needing the manufacturer’s original charger. It will change the way people charge their devices.

Adaptable and Flexible

Based on the 30 Mech footprint, the USB mech will fit into a standard 30 Mech aperture. This makes it a highly flexible solution across the range of Clipsal plate offers. Some include; Clipsal 2000 Series™, C2000 Series™, Saturn™ and Saturn™ Zen, Slimline® and Standard.

Match coloured plates with compatible colour caps, to suit decor or identify type of power in a commercial environment.

Integrate into a plate or panel solutions to suit the project. Fit 3-mechs in a wall-plate or combine powerpoints and USB mechs to create USB power points. (Excluding Saturn™ and Saturn™ Zen power points - Twin power point and USB charger is sold assembled)

Available for purchase as a single mech or pre-assembled plate combination.

Available in a number of double GPOs with USB configurations, including Saturn™, Saturn™ Zen, 2000 Series™ and C2000 Series™.

Efficient

The USB Mech incorporates a Type A USB Connector. Designed to be compatible with SB-IF Battery Charging Specification 1.2 (BC 1.2).

Includes cable compensation. This ensures charging time is optimised by accounting for the characteristics of the cable being used.

Uses a charging current of 1.2A and uses less than 0.07W of power while in standby mode.

Substitute powerpoints with the USB mech in a commercial environment. The system load, infrastructure and cost requirements can be substantially reduced.

Browse the Clipsal Catalogue for USB Chargers

Reliable

The outlet has a SELV output (Separated Extra Low Voltage) so is safe to use.

Don’t worry about power surges; it includes protection against adverse electrical and temperature conditions. Be confident that your electronic devices are always protected.

The 30 USB Mech has also been extensively tested in a variety of applications. Certified to all relevant safety and EMC requirements for Australia.

Applications

Perfect for homes, schools, universities, hotel rooms, airports, office buildings, retail outlets and hospitals. USB charging modules can be inserted into wall plates so they can be mounted alongside switches and dimmers, or next to bedside tables in the home or hotel room.

Clipsal's 30 Series USB Charger Mech Features and Benefits

Supply voltage – 230V AC, nominal
Supply frequency – 50Hz
Output current of 1.2A
Fits standard 30 Mech aperture
Surge, over-current and over-temperature protection
Cable compensation for optimised charging
Meets BCS1.2 USB Charging Standard
Meets safety standards IEC 60950-1 and AS/NZS 3100
Meets EMC standards CISPR 22 and AS/NZS 4665
Available in pre-assembled plates: Saturn™, Saturn™ Zen, 2000 Series™ and C2000 Series™.