|
|
Flush Mount smoke alarm
Who says smoke alarms can’t be stylish? Clipsal Firetek’s® new flush mount model offers you and your family maximum protection against smoke and fire danger but is an amazing 60% smaller than a traditional smoke alarm.
Featuring a sleek, modern design that blends into any décor, the flush mount smoke alarm offers you total protection without compromising on style.
|
Test/Hush feature
A combined single Test/Hush button on the ionisation and photoelectric detectors allows the home owner or installer to test the operation of the smoke alarm by holding down the Test button and sounding the alarm.
The same push-button can be used to silence the smoke alarm in the case of unwanted or false alarm. Press and hold the Hush Button to quiet the alarm. Normal operation will automatically after about 10 minutes.
If the smoke level continues to rise while the alarm is in Hush Mode the alarm will be re-activated, signifying that there may still be a fire burning or other hazardous condition present.
|
Battery backup facility
Smoke alarms with an a.c. power source are constantly powered, but also incorporate a backup battery. This ensures that the alarm is always operational, even if the mains power is cut.
Instant alarm status
Clipsal Firetek® smoke alarms incorporate both audible and visual indicators to notify occupants of the alarm status.
During normal operation, a green indicator signifies power available, whilst a red indicator flashes about once per minute showing the battery check in progress.
If smoke is detected the alarm will sound a loud 85 decibel audible siren. The red indicator flashes rapidly (about once per second) to indicate the alarm has been activated.
If the user presses the Hush Button, the audible alarm will be silenced, and the red indicator will flash periodically (about once every 10 seconds) to show the Hushed status.
|
| Operating Guide |
| Red Indicator |
Siren |
Meaning |
| Fast flash |
On |
Local alarm |
| Medium flash |
Off |
Unit in hush mode |
| Slow flash |
Off
Chirps |
Normal operation
Low battery condition |
| Off |
On
Off |
Remote alarm
All power lost |
| Green Indicator |
Siren |
Meaning |
| On |
n/a |
Mains power ok |
| Off |
n/a |
Mains power lost |
| See installation manual for further details |
| When alarm beeps at approximately one minute intervals replace battery |
| |
|