Fire Rated Wall Boxes Now acoustically rated and designed for easy fixing
Suitable for one and two hour fire rated walls
Maintaining fire ratings of walls even in back to back installations, Clipsal Fire Rated Wall Boxes are manufactured from robust Galvabond to prevent distortion or corrosion, even under the toughest of conditions.
All wall boxes are provided with ample knockouts for easy cable access. In addition, fixing boxes to plasterboard walls is easier than ever before thanks to clamping arms that quickly slide into place and tighten.
Installation of electrical accessories into the wall boxes is simple with the adjustable 84mm centres.
Acoustically rated up to STC50
The sound transmission rating of these wall boxes makes them perfect for back to back installation in almost any location, including units, apartments, motels, hospitals and commercial premises.
A typical back to back installation
Performance
All the Clipsal Fire Rated Wall Boxes have been tested in accordance with AS1530.4 and AS4072.1 for Fire Rating and have achieved an FRL of both -/60/60 and -/120/120 in appropriately constructed partitions.
Similarly, all the Clipsal Fire Rated Wall Boxes were tested in accordance with AS1191, AS1276, AS1045, for sound transmission and achieved a rating of up
to STC 50 using various Clipsal accessories.
These ratings are all dependent on strict adherence to installation instructions.
Installation
By law, Electrical Products must be installed by an electrical contractor - a licensed professional who can give you the best advice about installing electrical product in your home. Click here to locate an installer near you!
|
| Feature |
Benefit |
|
Adjustable 84mm centres. |
Accessories easy to align. |
| Robust construction. |
No distortion, even in the toughest conditions. |
| High quality corrosion resistant finish. |
Guaranteed not to rust. |
| Ample knockouts. |
Easy access for cables. |
| 1 & 2 hour fire rating - back to back. |
Suitable for virtually any fire rated application. |
| Acoustic rated up to STC50. |
Sound transmission rating for virtually any application. |
| Cat. No. |
Description |
|
157/1F
 |
One gang Wall Box for mounting all standard pattern accessories in the Standard Range, 2000 Series, C2000 Series and Metal Plate Range, as well as most products in the Prestige P2000 Range. Cut out size: 96mm x 52mm |
157/2F
 |
Two gang Wall Box for mounting large format switches such as 31/2VA,
25/2 and similar products, as well as Prestige P2000 products such as P2031/2VA, P2032/2VA, P2033/2VA and P2034/2VA. Cut out size: 96mm x 96mm. |
2157/2F
 |
Two gang 2000 Series Wall Box which enables 2 x 2000 Series accessories to be mounted on a fire rated wall and covered by a 2000/2 Multiple Surround. Cut out size: 135mm x 98mm. |
2157/3F
 |
Three gang 2000 Series Wall Box which enables 3 x 2000 Series accessories to be mounted on a fire rated wall and covered by a 2000/3 Multiple Surround. Cut out size: 206mm x 98mm. |
Sure Fire Sealing with Clipsal Fyre Seal Mastic
Cat. No. 157FSM
Installing our Fire Rated Wall Boxes is now even easier with new Clipsal Fyre Seal Mastic.
This product is a non-toxic, non-irritant, flexible water based sealant for fire resistant sealing of gaps around wall boxes, cables, conduit, busways and ducts which penetrate walls, floors and ceilings.
It can also be used to replace any intumescent material inadvertently removed during wall box installation.
Supplied in an easy to use 300ml cartridge, Fyre Seal Mastic gives up to 4 hours FRL when tested to AS1530 Part 4 1990.
Despite providing an excellent bond to metal, concrete, plasterboard and cable coverings, it remains soft and flexible after curing in order to accommodate thermal cycling movements.
|